How to Improve the Heating System of Your Home

How to Improve the Heating System of Your Home

Heating a home can be an expensive proposition. luckily, there are techniques to assist us in lowering our energy expenses while improving our heating efficiency. The most apparent things to consider include insulation, landscaping, window upgrades, precise selection of appliances, and a properly sized and working heating system.

Taking into consideration the safety purpose, any changes or tune ups to your heating system should be done by a heating system specialist. However, other modifications can easily and safely be done by homeowners including cleaning registers, replacing filters, insulating ducts and pipes, and installing programmable thermometers. Cleaning registers and baseboards Dirt, dust, grime, and bugs can all restrict the registers from working in a proper way. Therefore, it is important to vacuum the registers thoroughly. besides, if you have baseboard heaters, vacuum them completely if it is necessary.

Replacing filters

The process of replacing the filters should be done on a monthly basis during the cold season. Be convinced that you buy the correct size for your heating system. Actually, a lot of heating systems offer the choice between a recyclable filter that lasts about a year or a throw away filter that lasts for a one time use only. The one-time use filters require a careful vacuuming or washing each month.

The efficiency of your heating system is hindered by using a dirty filter as it restricts air flow. Consecutively, it causes the fan to work harder and the furnace to work longer. This brings to a higher use of energy and at the same time a higher cost for energy. If you purchase clean filters for your heating system will provide a more productive service.

Insulating ducts and pipes

The key for saving on heating expenses are insulating pipes and ducts. The maintenance and use of the proper insulating material is very important for the job to ensure both the safety of the home and the benefit of the insulation. Buy high temperature grade insulation for steam pipes. A fiberglass wrap is very effective for this task. Hot water and hydronic systems can typically use foam insulation as long as it is rated for at least 220 degrees.

Besides, examine for leaks in the ducts. Seal off any leaks using caulking, mastic, or duct tape properly prior to insulating the ducts. The efficiency of your heating system related to the number of leaks that you have corrected will be improved by doing that.

Installing programmable thermometers

In case if you want to make conservation by turning down the thermostat at night, you can benefit by the installation of a programmable thermostat. The advantage of a programmable thermostat is that it can automatically decrease the temperature setting for the heating system. Besides, it can automatically raise the temperature setting for the heating system right before you get up. This is one of the most cost effective strategies that a landlord can use to save on home heating energy costs.

Radiators

If there are radiators in your heating system, you can take advantage of a little reflection. You need just to place a foil reflector behind the radiator to so as to reflect heat into the room. Foil faced insulation that is rigid, radiant barrier material, or homemade aluminum foil cardboard sheets will give the necessary surface to reflect the heat.

It is very important to release or flow out any air that is clogged in your radiator. Just buy a radiator key. When you open the valve to release the air just hold a pan, cup, or other container underneath it. Immediately close the valve when you notice that the water issues from it. Trapped air is often at the root of clanging noises issuing from radiators.

Take care of your heating system properly and it will take care of you. A few simple preventative steps can produce an energy efficient heating system and a warm and toasty home.